
By Callum Reid -@highlandheresy
Pinning Miniatures
ABOUT
Sometimes your miniature needs extra support, especially when trying to portray a sense of action like jumping or running.
Â
To do this, I like to secure my miniature with the pinning technique and here's how I do it!
​
When building custom bases, I always prefer to pin. Superglue on its own, I don’t find secure enough. Excessive amounts will also lead to frosting.
Â
Typically, I will use a 1mm drill bit to drill through the feet of the model. A couple of millimetres is sufficient.Â
Â
I then cut 1mm brass rods and superglue them into the drilled holes. Sections cut to approx 6/7mm. Once complete, to mark the holes on the base, I will use a black acrylic marker to dot the other end of the glued brass rods. I press the model into the base to mark the holes I then need to drill.
​
Once complete, I fix the model to the base with superglue. Any small gaps left between the base and model I will fill with some texture paste or hide with a generous application of tactical vegetation!
Kit List / Suggestions
Get one with a comfortable grip and decent drill bits.
Used as the main support.
I like to use thicker gel-based glue such as Loctite and Gorilla Glue.
For marking where holes need to be drilled.
I really like using the Warhammer Stirland Mud and the Vallejo and AK Interactive pastes.















